MainPage:Nuclear:Summer2018:Callum

Crystal Drawing Instrumentation Assembly and Testing

The furnace temperature profile was done with a K type thermocouple with an uncertainty of 1 degree Celsius over 1000 degrees. With this in mind we get the thermal gradient corresponding to the linked file. The outside temperature is collected from an off center position. This is the ideal location for any electronics that may be located near the hole in the furnace. Without a fan the temperatures are manageable for the electronics but the fan would allow for the electronics to last longer.

[thermal data]

Kaon Data Analysis from Spring 2018 Run

The scripts for analysis are still in the production stage. With the help of Mark Jones the script is being modified to make use of data collected accurately.

[kinematic data]

First Week Presentation [presentation]

Sixth Week Presentation [link]