Difference between revisions of "MainPage:Nuclear:Summer2017:Blessed"
Jump to navigation
Jump to search
(Created page with "''' <font size= "5"> Commissioning of a crystal drawing system </font>''' <br> <h1> Abstract </h1> <p>Text.</p> <h1> Introduction </h1> <p>Text.</p> <h1> Description of the cr...") |
|||
| Line 13: | Line 13: | ||
<p>Text.</p> | <p>Text.</p> | ||
[[File:20170621 135238.jpg|thumb|center|250px| Initial setup to calibrate the accelerometer]] | [[File:20170621 135238.jpg|thumb|center|250px| Initial setup to calibrate the accelerometer]] | ||
| + | |||
| + | calibration of the accelerometer: | ||
| + | |||
| + | misalignment angle measured gravity deviation percentage | ||
| + | |||
| + | 2.26245953203 degrees, 9.80764530293 m/s^2, 0.0816326530612 % for the x-axis | ||
| + | |||
| + | 2.11138229046 degrees, 9.80665779414 m/s^2, 0.0714285714286 % for the y-axis | ||
| + | |||
| + | 1.88511051001 degrees, 9.80530664911 m/s^2, 0.0510204081633 % for the z-axis | ||
[[File:Vib1.png|thumb|center|250px| Initial result using the calibrated accelerometer sensor and the assembled mechanical setup of the crystal drawing prototype. The coordinate system is such that the z-axis and x-axis get to be parallel with gravity, while the y-axis is parallel to the shaft. The sampling rate was 100ms and the rotation setting was 3]] | [[File:Vib1.png|thumb|center|250px| Initial result using the calibrated accelerometer sensor and the assembled mechanical setup of the crystal drawing prototype. The coordinate system is such that the z-axis and x-axis get to be parallel with gravity, while the y-axis is parallel to the shaft. The sampling rate was 100ms and the rotation setting was 3]] | ||
Revision as of 11:50, 28 June 2017
Commissioning of a crystal drawing system
Abstract
Text.
Introduction
Text.
Description of the crystal drawing apparatus
Text.
Vibration Studies
Text.
calibration of the accelerometer:
misalignment angle measured gravity deviation percentage
2.26245953203 degrees, 9.80764530293 m/s^2, 0.0816326530612 % for the x-axis
2.11138229046 degrees, 9.80665779414 m/s^2, 0.0714285714286 % for the y-axis
1.88511051001 degrees, 9.80530664911 m/s^2, 0.0510204081633 % for the z-axis
Initial result using the calibrated accelerometer sensor and the assembled mechanical setup of the crystal drawing prototype. The coordinate system is such that the z-axis and x-axis get to be parallel with gravity, while the y-axis is parallel to the shaft. The sampling rate was 100ms and the rotation setting was 3
Rotation Studies
Text.
Calibration of the load cell
Text.